Advidia A-200 Manual do Utilizador descarregar pdf (Página 78)

Appendix 2 Port Mapping

The following settings are for TP-LINK router (TL-R410). The settings vary depending

on different models of routers.

Steps:

1. Select the WAN Connection Type, as shown below:

Figure A.2.1 Select the WAN Connection Type

2. Set the LAN parameters of the router as in the following figure, including IP

address and subnet mask settings.

Figure A.2.2 Set the LAN parameters

3. Set the port mapping in the virtual severs of Forwarding. By default, camera uses

port 80, 8000, 554 and 8200. You can change these ports value with web browser

or client software.

Example:

When the cameras are connected to the same router, you can configure the ports

of a camera as 80, 8000, 554 and 8200 with IP address 192.168.1.23, and the

1 2 ... 73 74 75 76 77 78 79 80

Sem comentários

Advidia A-200 Manual do Utilizador Página 78