Advidia VP-4 Manual do Utilizador descarregar pdf (Página 26)

5.4.2 Setting / Calling A Preset

Setting a Preset:

1. In live view mode, select a preset number from the preset list.

Figure 5.5 Set a Preset

2. Use the PTZ control buttons to move the lens in the desired position. You can use any of the

following commands:

• Pan the camera to the right or left.

• Tilt the camera up or down.

• Zoom in or out.

• Refocus the lens.

3. Click the icon to finish the setting of current preset.

Note: Up to 256 presets can be configured.

Calling a Preset:

This feature enables the camera to point to a specified preset scene when an event takes place.

For the pre-defined preset, you can call it at any time to the desired preset scene.

In live view mode, select a predefined preset from the list and click the icon to call a preset.

Figure 5.6 Call a Preset

Linking to Alarm:

The preset can also be used to link to the alarm input when there is alarm event occurring.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 61 62

Sem comentários

Advidia VP-4 Manual do Utilizador Página 26