Advidia "A" Series Manual do Utilizador descarregar pdf (Página 32)

Firmware User Manual

Port Mapping

The section Port Mapping provides the list of services and protocols that

require their own port number for communication. By default, the camera already has all the ports

defined. On this page, the user can modify the port numbers in case there is a specific need for that.

Most often, the HTTP port is changed to something other than 80 in order to match with

easy-to-remember port forwarding rules of the router that acts as a bridge between local area network

and Internet.

Parameters

Description

HTTP port

Select the port assigned for HTTP protocol access

Search Server Port1

Select the first port used by server search applications to detect this IP

device. (e.g. IP Utility)

Search Server Port2

Select the second port used by server search applications to detect this

IP device. (e.g. IP Utility)

Control Server Port

Select the port used to support video control function by application

programs. (e.g. NVR)

Streaming Server Port

Select the port used by this IP device for Video Streaming (TCP)

RTSP Server Port

Select the port assigned for RTSP protocol access

RTP Multicast Video Port for

Media1

Select the port for the multicast video streaming of Stream 1 via RTP

protocol

RTP Multicast Video Port for

Media2

Select the port for the multicast video streaming of Stream 2 via RTP

protocol

Multicast IP

Select the multicast IP. Default settings is 228.5.6.1

Multicast TTL

Select the multicast TTL. Default setting is 255

After changing any of the items above, press Apply to save the changes. The Reset button will clear the

changes that had just been made but not applied yet. New port settings will only take effect after clicking

System -> Save & Reboot.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 111 112

Sem comentários

Advidia "A" Series Manual do Utilizador Página 32