Advidia "A" Series Manual do Utilizador descarregar pdf (Página 100)

Advidia A Series Network Camera User Manual

100

Appendix 2 Port Mapping

The following settings are for TP-LINK router (TL-WR641G). The settings vary depending on

different models of routers.

Steps:

1. Select the WAN Connection Type, as shown below:

Figure A.2.1 Select the WAN Connection Type

2. Set the LAN parameters of the router as in the following figure, including IP address and

subnet mask settings.

Figure A.2.2 Set the LAN parameters

3. Set the port mapping in the virtual severs of Forwarding. By default, camera uses port 80,

8000 and 554. You can change these ports value with web browser or client software.

Example:

When the cameras are connected to the same router, you can configure the ports of a

camera as 80, 8000, and 554 with IP address 192.168.1.23, and the ports of another

camera as 81, 8001, 555, 8201 with IP 192.168.1.24. Refer to the steps as below:

Steps:

1 2 ... 95 96 97 98 99 100 101

Sem comentários

Advidia "A" Series Manual do Utilizador Página 100